Checking the status of the gasket
Unscrew the cylinder. Turn the Aarke machine upside down. Look into the cylinder compartment. Look if there is a black gasket (a black ring) around the brass pin and that it seems to be in place correctly.
Replacing gasket
1. The extra gasket is placed under the foot below the sticker with the text “Extra gasket”. Remove the sticker and take out the rubber gasket.
2. Make sure that the CO2 cylinder is not installed in the machine. A few inches below the black split line there is a screw at the back of the machine. Unscrew it.
3. Grab the upper part of the machine and lift it out from the body.
4. Turn the upper part upside down and look into it. If needed, take out the old gasket with a tweezer/nipper or a small screwdriver.
5. Put the new gasket into the circular hole and push it in